Copper Housing Lm35 Digital Temperature Sensor Probe

• Customization: Available
• Installation Type: Surface Mounting
• Sensing Type: Resistive
• Model NO.: DCQ118
• Contact: Contact
• Output Signal Type: Digital Type
• Production Process: Waterproof
• Material: PTFE
• Measuring Medium: Temperature
• IP Rating: IP65
• Certification: RoHS
• Customized: Customized
• Connector: AMP 7706
• Length: 1m, 1.5m, 2m, 5m, etc
• Probe: Copper Housing
• Cable: PTFE Cable
• Pin Definition: Vcc, Gnd, Dq
• Type: Waterproof
• Operating Temperature: -55~+150ºC
• Accuracy: ±0.5°c
• Power Supply: 4V ~ 30V
• Transport Package: PE Bag, Paper Carton
• Specification: LM35CZ
• Trademark: Senstech
• Origin: Guangdong, China
• HS Code: 9025191010
• Production Capacity: 100000PCS/Week
• Package Size: 0.20cm * 0.10cm * 0.10cm
• Package Gross Weight: 0.020kg

Product Description

Copper housing LM35 Digital temperature Sensor Probe 

More Specifications

Probe	DT6-5 Ring lug probe, Brass housing, Copper housing, Stainless steel tube, Copper tube with clip, can customized
Cable	PVC Cable, PTFE cable,  Silicone cable, TPE cable, XLPE cable, Fiberglass cable,  can customized
Connector	3.5mm stereo plug, Mini type C plug, JST, 0508 terminal, Fork terminal, RJ11/12/45, AMP 7706, PH, XH, SM, or another
Length	85cm, 1m, 1.5m, 2m, 5m, customized

Main Features

Calibrated Directly in Celsius (Centigrade)
Linear + 10-mV/°C Scale Factor
0.5°C Ensured Accuracy (at 25°C)
Rated for Full −55°C to 150°C Range
Suitable for Remote Applications
Low-Cost Due to Wafer-Level Trimming
Operates from 4 V to 30 V
Less than 60-μA Current Drain
Low Self-Heating, 0.08°C in Still Air
Non-Linearity Only ±¼°C Typical
Low-Impedance Output, 0.1 Ω for 1-mA Load
Introduction

The LM35 temperature sensors are precision integrated-circuit temperature devices with an output voltage linearly proportional to the Centigrade temperature. The LM35 device has an advantage over linear temperature sensors calibrated in Kelvin, as the user is not required to subtract a large constant voltage from the output to obtain convenient Centigrade scaling. The LM35 device does not require any external calibration or trimming to provide typical accuracies of ±¼°C at room temperature and ±¾°C over a full −55°C to 150°C temperature range. Lower cost is assured by trimming and calibration at the wafer level. The low-output impedance, linear output, and precise inherent calibration of the LM35 device makes interfacing to readout or control circuitry especially easy. The device is used with single power supplies, or with plus and minus supplies. As the LM35 device draws only 60 μA from the supply, it has very low self-heating of less than 0.1°C in still air.

All the described above is for reference only, customized design is available!!!

Applications

This high quality probe is used for thermostatic controls, thermometers, or any thermally sensitive systems. And it suitable for wet or harsh environments(Waterproof).

1. Greenhouse

2. Cold-chain Transportation
3. Weather detection
4. HVAC System
5. Home Applications
6. Thermally Sensitive Systems
7. Industrial Systems 
8. Thermostatic Controls
9. Consumer Products
10. Thermometers                        and so on........

Recommend product

HOW TO ORDER:
Please feel free to tell us your requirements about 
a. sensor spec ?
b. probe size ?
c. cable length ?
d. working environment or temperature range ?
e. any other special requirement ?

Welcome to contact us for more information and prices!!!