Brass Housing Lm35 Digital Temperature Sensor Probe with Clip for Pipeline

• Customization: Available
• Installation Type: Surface Mounting
• Sensing Type: Resistive
• Model NO.: LM35DZ
• Contact: Contact
• Output Signal Type: Digital Type
• Production Process: Waterproof
• Material: Brass
• Measuring Medium: Temperature
• IP Rating: IP67
• Certification: RoHS
• Customized: Customized
• Connector: AMP 7706
• Length: 1m, 1.5m, 2m, 5m, etc
• Probe: Brass Housing
• Cable: PTFE Cable
• Pin Definition: Vcc, Gnd, Dq
• Operating Temperature: -40~+120ºC
• Accuracy: ±0.5°c
• Power Supply: 4V ~ 30V
• Transport Package: PE Bag, Paper Carton
• Specification: LM35DZ
• Trademark: Senstech
• Origin: Guangdong, China
• HS Code: 9025191010
• Production Capacity: 100000PCS/Week
• Package Size: 0.30cm * 0.10cm * 0.20cm
• Package Gross Weight: 0.030kg

Product Description

Brass Housing Lm35 Digital Temperature Sensor Probe with Clip for Pipeline

More Specifications

Probe	Brass housing, ABS probe, Over-molding probe, Ring lug probe, Flanged probe, Copper housing, Stainless steel tube, Copper tube with clip, or another
Cable	PTFE cable, PVC cable, Fiberglass cable, Mica cable, PFA cable, Silicone cable, TPE cable, or another
Connector	JST, TE, Molex, USB-type C plug, GX12 connector, M12 connector, RJ11, RJ12, RJ45, AMP 7706, Fork terminal, terminal blocks, Aviation connector, PH, XH, SM, or another
Cable Length	85cm, 1m, 1.5m, 2m, 5m, or customized

Main Features

Calibrated Directly in Celsius (Centigrade)
Linear + 10-mV/°C Scale Factor
0.5°C Ensured Accuracy (at 25°C)
Rated for Full −55°C to 150°C Range
Suitable for Remote Applications
Low-Cost Due to Wafer-Level Trimming
Operates from 4 V to 30 V
Less than 60-μA Current Drain
Low Self-Heating, 0.08°C in Still Air
Non-Linearity Only ±¼°C Typical
Low-Impedance Output, 0.1 Ω for 1-mA Load
Introduction

The LM35 temperature sensors are precision integrated-circuit temperature devices with an output voltage linearly proportional to the Centigrade temperature. The LM35 device has an advantage over linear temperature sensors calibrated in Kelvin, as the user is not required to subtract a large constant voltage from the output to obtain convenient Centigrade scaling. The LM35 device does not require any external calibration or trimming to provide typical accuracies of ±¼°C at room temperature and ±¾°C over a full −55°C to 150°C temperature range. Lower cost is assured by trimming and calibration at the wafer level. The low-output impedance, linear output, and precise inherent calibration of the LM35 device makes interfacing to readout or control circuitry especially easy. The device is used with single power supplies, or with plus and minus supplies. As the LM35 device draws only 60 μA from the supply, it has very low self-heating of less than 0.1°C in still air.

Recommend Product

.