Waterproof Temperature Sensor Probe Lm35 Rj12 Connector

• Installation Type: Easy Install
• Sensing Type: Digital Sensor
• Contact: Contact
• Output Signal Type: Digital Type
• Production Process: Integration
• Material: Stainless Steel and Plastic
• Model NO.: LM35 Temperatue Sensor
• Measuring Medium: Temperature
• IP Rating: IP68
• Certification: RoHS
• Customized: Customized
• Sensor Chip: Dallas /Maxim
• Stainless Steel Probe: SS304 or SS316
• Cable Meaterials: Silicone / PVC/TPE/ Stainless Cover Cable
• Connector: RJ45/Rj12/Rj11 ...etc
• Probe Materials: Copper/Stainless Steel /Plastic
• Cable Length: 0.5m/1m/2m/5m or Customized Require
• Waterproof: IP67;IP68 Have Test Report
• Range of Application: Granary;Cold-Chain Logistics,Weather Station,etc
• Custom-Made: Cable Length;Probe Dimension;Connector Parts Numbe
• Potting Glue: Epoxy Resin;Silicone Glue;etc
• Salt Water Resistance: TPE Materials Cable Able to Use in Salt Water
• Waterproof Probe: Whole Injection Housing;Stainless Steel Probe
• RJ45 Connector: RJ458p8c or Rj12 4p4c
• Transport Package: Paper Carton
• Specification: 48x33x20
• Trademark: Senstech
• Origin: Made in Shenzhen
• HS Code: 9025199090
• Production Capacity: 300000 Per Week

Product Description

Waterproof Temperature Sensor Probe LM35 RJ12 Connector

DESCRIPTION

• There are many different package types LM35.
• At room temperature, LM35 does not require the amount Outside the calibration process can be achieved by ± 1/4 ºC accuracy.
• The power supply mode of a single negative dual power supply with two, the pin is shown in Fig, positive and negative dual power supply mode provides a negative temperature measurement; two configurations of the quiescent current temperature relationship, in the stationary self-heating effects in low temperature (0.08 ºC), single-supply mode quiescent current at 25 ºC approximately 50μA, wide operating voltage, available in 4-20V supply voltage range work very power.
• Such a small current also makes the chip is particularly suitable in some applications, such as in battery powered applications, the output can be removed by the third pin, no need calibration.

SPECIFICATIONS

• LM35DZ output is 0 ºC ~ 100 ºC,
• The probe uses new imported LM35 temperature sensor chip, the chip were used for each pin shrink tube separated to prevent short circuit, internal sealant, waterproof!

Operation

• High quality stainless steel pipe anti-rust waterproof package
• Stainless steel housing (6 * 50mm), lead length 1000mm
• Operating voltage 4.0V ~ 20V
• Temperature range 0 ºC ~ +100 ºC
• Be powered by a single 5V supply, 0 ºC when the output is 0 V, is increased by 1 ºC, the output voltage increases10mV;
• No external components, the unique single-bus interface
• Output leads: Red (VCC), yellow (DATA), black (GND)

 

L1			30mm;45mm;50mm;100mm or to be advised by customer
L2			1M;2M;3M;5M;6M;10M;15M or to be advised by customer
OD			6mm or to be advised by customer

 

Waterproof LM35 temperature sensor
Probe			Metal, Plastic; bullet type, cylinder type, surface mounting type, screw type, Epoxy resin, plastic overmolding, flange type, clamp type, various coating configurations and shell materials are available
Cable			TPE /PVC/Silicone cable 1m, 2m, 3m, 5m, 10m, 15m or Customized
Connector			TJC3 2.54, SMR, SMP, 5566, PH, EH, 557, YC8, YC9, M6, M8, M10. M12, M16, RJ11, RJ12, RJ45, RJ50, 3.5mm Jack

Cable specs:

• Cable is 36",100cm;2M;5M,it is upon customer requirement, OD3.5mm or OD5mm 
• Cable materials: PVC;TPE; Silicone; Stainless steel braided; PTFE;Teflon..etc
• 3.5mm plug connection is upon your requirement,normally Pin1-VCC;Pin2-DQ;Pin3-GND;

 

 

   Q: Are you trading company or manufacturer ?

    A: We are a manufacturer of temperature sensors, and we have 19 years production experience.
   Q: How long is your lead time?

    A: Generally it is 2-3 weeks for ordinary products. For custom-made types, it might be 3 to 4 weeks
         for initial order.   
   Q: Do you provide samples ? is it free or extra ?

    A: Yes, we could offer the sample for free if we have in stock, but we do not cover shipping cost.  
   Q: What is your terms of payment ?

   A: Payment<=3000USD, 100% T/T in advance. Payment>3000USD, 30% deposit in advance ,balance
        before shippment.If you have any other question,pls feel free to contact us.

 We believe in establishing a strong partnership with our customers through:
✓ Fast and cost efficient delivery of high quality applications.
✓ Access to highly skilled resources who are quality and delivery driven.
✓ Policy for a business and client focused operation.
✓ Responsive and strong support team for ongoing improvement and changes.
✓ Passion for continued alliance with our clients to help them shape and achieve their future visions
    and strategies.